The EasyPIT® ULTRA chamber system is a high strength product designed for heavy load installations. The 400kN vertical loading allows the ULTRA to be used in areas with high wheel loads such as highways and trunk roads. When combined with our range of ductile iron access cover & frame products they provide the installer with a complete access system solution.
Each EasyPIT® ULTRA ring section consists of corner components and straight wall “bricks”. Using configurations of these pieces allows the ULTRA to be assembled into a vast range of industry standard and bespoke sizes.
EasyPIT® chambers are manufactured from highly durable, recycled Polypropylene materials. Polypropylene has a high tensile strength, which means it is an ideal material for products exposed to heavy loads.
As the ULTRA is modular by design, this offers fantastic flexibility when it comes to clear opening options and logistics. Component or “kit-form” chambers can be transported far more economically than ready assembled chambers.
Traditionally, large or high load access chambers were brick built or cast in-situ with length installation and reinstatement times. ULTRA chambers offer significantly reduced install times, requiring less labour on-site and ultimately allowing sites and roads to be re-opened quicker.
As the ULTRA is modular by design, this offers fantastic flexibility when it comes to clear opening options and logistics. Component or “kit-form” chambers can be transported far more economically than ready assembled chambers.
EasyPIT® ULTRA chambers have been independently tested in accordance with BSEN124 D400 loadings and are suitable for areas imposing wheel loads of 40 tonne such as highways, trunk roads, transport yards and commercial areas.
Each 150mm deep section is designed to simply stack and locate on top of each other to form the required depth of chamber. The castellated design offers a secure fit between sections and prevents lateral movement once sections have been placed.
EasyPIT® ULTRA can be configured to offer almost any size chamber required. Due to the modular design with corner and brick components, ULTRA provides the installer with a truly versatile chamber product suitable for every application.
The EasyPIT® Ultra chamber system has a range of industry standard clear openings. These provide finished access chambers from 300x300mm to 1800x1800mm.
We also offer a vast range of bespoke size options up to 3500x3500mm and beyond.
EasyPIT® chambers can be assembled by utilising the interlocking chamber ring sections that are simply stacked on top of each other. This process is continued until the specified depth required on-site has been reached.
Chambers have been designed with a castellated top so that they positively engage with the section below. All standard sizes are below 25 kg and as such are suitable for single person lift within manual handling regulations.
| REFERENCE | SIZE | LOADING |
|---|---|---|
EPIT3030D | 300X300X150MM | D400 |
EPIT45030D | 450X300X150MM | D400 |
EPIT4545D | 450X450X150MM | D400 |
EPIT6045D | 600X400X150MM | D400 |
EPIT6060D | 600X600X150MM | D400 |
EPIT7560D | 750X650X150MM | D400 |
EPIT7575D | 750X750X150MM | D400 |
EPIT9045D | 900X450X150MM | D400 |
EPIT9060D | 900X600X150MM | D400 |
EPIT9090D | 900X900X150MM | D400 |
EPIT12060D | 1200X600X150MM | D400 |
EPIT12067D | 1200X675X150MM | D400 |
EPIT12075D | 1200X750X150MM | D400 |
EPIT12090D | 1200X900X150MM | D400 |
EPIT120120
D | 1200X1200X150MM | D400 |
EPIT13085D | 1300X850X150MM | D400 |
EPIT13090D | 1300X900X150MM | D400 |
EPIT15075D | 1500X750X150MM | D400 |
EPIT15090D | 1500X900X150MM | D400 |
EPIT150150
D | 1500X1500X150MM | D400 |
EPIT180180
D | 1800X1800X150MM | D400 |
* Additional sizes available on request
Our experienced sales team are available to discuss any project in further detail offering technical advice and cost saving solutions.
For more information, please contact us.
